Nickel-Coated Steel Hoist Ring for Lifting,3/4"-10 x 1.5", 6-3/8" Overall Height

Description

Nickel-Coated
Steel Hoist Ring for Lifting
3/4"-10
Thread
Size,
1-1/2"
Thread
Length,
6-3/8"
Overall Height
Application
For Lifting
Thread Size
3/4"-10
Thread Length
1 1/2"
Inside Width
1 3/4"
Overall Height
6 3/8"
Material
Steel
Finish
Nickel Coated
Vertical Capacity
5,000 lbs.
Movement
180° Pivot and 360° Swivel
Specifications Met
ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209
RoHS
RoHS 3 (2015/863/EU) Compliant
REACH
REACH (EC 1907/2006) (01/16/2020, 205 SVHC) Compliant
Designed for angular
lifting,
hoist rings resist stresses that would bend or break an
eyebolt.
They have a lifting ring that pivots
180°
front to back and a base that swivels
360°
to compensate for
pitch,
roll,
and sway when lifting heavy or unbalanced
loads.
Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the
ring.
Nickel-coated steel is more corrosion resistant than black-oxide
steel.
Hoist rings that are CE marked meet European requirements for
health,
safety,
and environmental
protection.
Note:
Capacities listed are for vertical lifting
only.
As the lift angle changes from
vertical,
the amount of weight the hoist ring can lift is significantly
reduced.
For
example,
when lifting a
1,
000
lb.
load at a
45°
angle,
you must choose a hoist ring with a capacity of at least
1,
400
lbs.
Do not use at an angle less than
30°.
Warning:
Never use to lift people or items over
people.